Epson ET-15000 User Manual page 194

Setting Options
ECM On
Off
Dial Tone Detection On
Off
Line Type PSTN
PBX
Header Fax Header
Your Phone
Number
Receive Mode Manual
Auto
Distinctive Ring All
Single
Double
Triple
Double&Triple
Description
Turns on Error Correction Mode (ECM) to
automatically correct errors in sent or received fax
data
Turns off Error Correction Mode (ECM); color faxes
cannot be sent or received
Automatically dials the number you enter for faxing
when the product detects a dial tone
Turns off automatic dial tone detection, which may
be necessary if the product is connected to a PBX
(Private Branch Exchange) or a TA (Terminal
Adapter). However, turning this setting off may cause
the product to drop the first digit of a fax number.
Selects a standard phone line (Public Switched
Telephone Network)
Selects Private Branch Exchange, the type of phone
line used in office environments where an access
code such as 9 must be used to call an outside line
Select to enter the header information and your
phone number for inclusion on outgoing faxes
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product
Automatically receives and prints faxes
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so
your product can receive faxes on the correct
number of rings. Select All for phones lines that do
not use this service.
194