Table of Contents
Advertisement
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
8. Do one of the following:
• If there are no gaps, the print head is clean. Select O.
• If there are gaps or the pattern is faint, select X. Follow the instructions on the screen to clean the
print head.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours without printing. Then try cleaning the print head again. If quality still does not improve,
run a Power Cleaning. If there is still no improvement, contact Epson support.
Parent topic:
Print Head Cleaning
Related references
Where to Get Help
Related tasks
Checking the Nozzles Using the Product Control Panel
Power Cleaning Using the Product Control Panel
247
- Quick Links:
- Product Parts - Inside
Hide quick links:
Advertisement
Table of Contents
