Changing Default Scan Job Settings; Setting Up A Wsd Port (Windows 7/Windows Vista) - Epson ET-2751 User Manual

Setting
Original Orientation
Parent topic:

Changing Default Scan Job Settings

You can view or change the default scan job settings your product uses when you scan to your
computer. You do this using the Event Manager program.
1. Do one of the following to open Event Manager:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Event Manager.
• Windows (other versions): Click
> Event Manager.
• Mac: Open the Applications folder, click Epson Software, and select Event Manager.
2. Open the Scanner (Windows) or Select Scanner (Mac) drop-down list and select your product, if
necessary.
3. Click Make Job Settings.
4. Open the Edit Job Settings drop-down list and select the scan job settings you want to view or
change.
5. Change the settings as necessary.
6. Click OK.
7. Click Close to close the Event Manager window.
Parent topic:

Setting Up a WSD Port (Windows 7/Windows Vista)

You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on
Windows 10 and Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1. Turn on your product.
Available options
Portrait
Landscape
Starting a Scan Using the Product Control Panel
and select EPSON Software > Event Manager.
Starting a Scan Using the Product Control Panel
Description
Specifies the orientation of your
originals
or Start > All Programs or Programs > EPSON Software
113