Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Parent topic:
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance.
You see a screen like this:
5. Select Print Head Alignment.
6. Select one of the following options:
• Vertical Alignment if your printout is blurry or contains vertical ruled lines that are misaligned.
• Horizontal Alignment if your printout contains horizontal banding.
7. Follow the on-screen instructions to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
Adjusting Print Quality
home button, if necessary.
254