Equipment Description; Sbs 800 | 1000 | 1500 W | W Sol; Standard Delivery; Thermal Insulation Wd Sbs - STIEBEL ELTRON SBS 800 W Operation And Installation

installation

equipment description

5.1.2 Protective pipe allocation, temperature sensor
Protective pipe allocation SBS 800 | 1000 | 1500 W | W SOL
7
8
6
5
4
3
2
1
1 Heat pump return temperature sensor
2 Temperature sensor, solar (only SBS...W SOL)
3 Optional temperature sensor, heat pump return
(only SBS 1000/1500 W and W SOL)
4 Optional temperature sensor, DHW heat pump
5 Temperature sensor, additional heat source
6 Temperature sensor, DHW heat pump
7 Optional temperature sensor, additional heat source
8 Thermometer (on site)
www.stiebel-eltron.com
5.2

Standard delivery

5.2.1

SBS 800 | 1000 | 1500 W | W SOL

The standard delivery includes the following parts, packed in a
separate bag;
— operating and installation instructions
— additional type plate
5.3

thermal insulation wD SBS

Thermal insulation, specifically designed for the instantaneous
water heater cylinder is available as special accessory. The thermal
insulation comprises an outer jacket made from polystyrene, a
90 mm thick main thermal insulation made from EPTS and a
20 mm thick polyester fabric fleece layer.
Description
WD 800 SBS for SBS 800 W and W SOL
WD 1000 SBS for SBS 1000 W and W SOL
WD 1500 SBS for SBS 1500 W and W SOL
5.4

Special accessories

Description
Threaded immersion heater BGC
part no.
227585
227586
227587
part no.
075115
sBs w | sBs w sol | 15