Advertisement
29
PTT ID
30
DIAL ID
31
CONNECT ID
DISCONNEC
32
T ID
NO. of DTMF
33
KEY s
DTMF HOLD
34
TIME
STORE &
35
SEND
D KEY
36
ASSIGNMENT
Page 14
Disable
29 OFF
Connect
29
Disconnect
29
Both
29
Disable
30 OFF
ON
30 ON
Blank
31--------
0 × 1 ~ # × 16
31
31FFF FF
Blank
32--------
0 × 1 ~ # × 16
32
32 FFFFF
12keys
(0 ~ 9,*,#)
33
16keys (0 ~ 9,*,#,A ~
33
D)
Disable
34 OFF
Enable
34 ON
OFF
35 OFF
ON
35 ON
D Code
36 d
1s ~ 16s
36 1
(1s steps)
36 16
When transmitting, the programmed
Connect or Disconnect DTMF ANI will
not be sent when [DIAL] and the
respective "*" or "#" key is pressed.
1
When transmitting, the programmed
Connect DTMF ANI will be sent when
[DIAL] and "*" key is pressed.
2
When transmitting, the programmed
Disconnect DTMF ANI will be sent when
[DIAL] and "#" key is pressed.
When transmitting, the programmed
Connect or Disconnect DTMF ANI will
3
be sent when [DIAL] and respective "*"
or "#" key is pressed.
Disabled
When transmitting, a stored DTMF ANI
code will be sent when [DIAL] and a
memory location key is pushed. An ANI
number must be programmed in the
user mode. Up to 10 memory locations
can be used (keys 0 through 9).
No Connect ID is programmed.
0
At least 1 digit and up to 16 digits can
be programmed to be sent when [DIAL]
and "*" key is pressed. Note: Only the
last five digits of the ANI number will be
displayed.
No Disconnect ID is programmed.
At least 1 digit and up to 16 digits can
0
be programmed to be sent when [DIAL]
and "#" key is pressed. Note: Only the
last five digits of the ANI number will be
displayed.
12
Activates keys 0 through 9, plus * and #
16
Activates keys 0 through 9, plus A, B, C,
D, * and #.
No Hold Time
Continues to key for 2 seconds after the
last number on the DTMF key is
manually selected, but only if the PTT
button is released after the last number.
Does not allow Auto ID numbers to be
stored.
Allows Auto ID numbers to be stored.
Functions as a D key only
When transmitting, the radio transmits
an un-modulated signal for the
programmed time when [DIAL] and the
D key is pressed.
RELM Communications
Advertisement
