Advertisement
Using the unit's keypad, soft keys, and control knobs, the unit can be placed into one of several
different programming modes. It is important to note that only RELM authorized dealers with
qualified technicians are allowed to operate the RPV599 series radios in the programming mode
and to change any programming content. Figure 2.1 shows the different programming modes.
User Mode
Normal Operation
Dealer Mode
Global Settings
DTMF Settings
Enhanced Global Settings
Channel Settings
Wired Cloning
Wireless Cloning
Factory Mode
All Reset
All Segment Display Test
Band Set
Frequency Scan
Test Mode
Alignment Settings
PC Mode
Figure 2.1 – Programming Modes
Table 2.1 shows the functions that can be set for each of the "Dealer Modes". The dealer sets
the operations functions, channel frequencies, signal modes in accordance to the customer's
needs.
RELM Communications
Page 8
Advertisement
