Installation Of The Air Distributor Mounting Bracket; Connection Of The Air Inlet Duct; Installation Of The Air Distributor Assembly - Houghton Cool Top Trail 34 Operating And Installation Instructions

Air conditioner roof top unit
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4.9

Installation of the air distributor mounting bracket

Fig. 13: Installation of M8 bolts

4.10 Connection of the air inlet duct

Fig. 14: Connecting the air inlet duct

4.11 Installation of the air distributor assembly

Fig. 15: Removing the air filter
Fig. 16: Connecting air distributor - and outdoor unit
cables
Cool Top Trail 34
1
2
3
4
1
2
3
1
2
3
Prepare the M8 bolts (4), washers (3) and fixing met-
X
al clamping bars (2) in order shown.
Lift the air distributor mounting bracket (1) toward
X
the air conditioner.
Insert the M8 bolts, washers and metal clamping
X
bars into the 4 corner holes of the air distributor
mounting bracket. Screw the bolts into their receiv-
ing threads by hand to ensure engagement.
Ensure all bolts are screwed in correctly for at least 2
X
or 3 rotations to avoid cross threading.
Ensure the metal clamping bars align with the corre-
X
sponding recess in the air distributor mounting
bracket as the bolts are tightened.
Evenly tighten up all four bolts.
X
NOTE
Tighten the bolts to 11 Nm torque.
Grasp the free end of the air inlet (2) duct and pull it
X
down until it touches the air distributor mounting
bracket (1). Continue to pull the rim of the duct
down until it engages with the four latches (3) on
the air distributor mounting bracket.
– The duct is correctly connected when you hear
the four distinct clicking sounds of the latches and
the rim of the duct is parallel to the surface of the
bracket.
Remove the air filter from the air distributor by push-
X
ing both tabs (1) inwards (2) and then downwards
(3).
NOTE
Some figures show the air distributor with
LED lights. The mounting procedure is also
applicable for the version without lights.
Connect the socket and plug of the air distributor
X
wires and outdoor unit.
– Note that colours of the wires match: yellow to
yellow, red to red, etc.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents