Installation Guidance - Houghton BELAIRE T135C Owner's Manual

Caravan air-conditioners

Hide thumbs

Table Of Contents

Table of Contents

 Read this Manual thoroughly before installation and understand the guidance.

 Abide by the national circuit operation rules in the installation.

 Do not add other parts or restructure the product in the installation.

 The installers shall be equipped with refrigeration technician qualification certificates.

 Consult with HOUGHTON or the local distributor in the case of unusual applications or installation

conditions that are not specifically covered by this manual.

 The RV or caravan roof shall be able to support the air-conditioner's weight (40kg).

 The opening part of the roof shall be able to support the air-conditioner's weight and allow for the

corresponding operations.

 Minimum thickness of roof: ≥25mm; maximum thickness of roof: ≤85mm。

 If the roof's thickness is beyond the above requirements, you can purchase the enhanced length of the

outlet air duct and M8 installation bolts from HOUGHTON or the local distributor.

Load bearing of roof

 The roof shall be able to bear the weight of the

air-conditioner and shall be level without accumulating

water. It is suggested that the caravan manufacturer

confirms the suitability of the roof for load bearing.

 If the roof is not preserved with holes, they shall be

punched from the top of the roof to the inside and use

them as leading to punch through the ceiling. It is

suggested to consult with the caravan manufacturer to

get the best punching method.

 The square holes (360 x 360mm) on the roof require

for woods of 20mm minimum thickness to padding

and fixing to bear the pressure once the bolts are fixed

and keep air away from entering the cavity of the roof.

Please be careful of the preserved wire holes.