Plenum Mounting - Houghton H2000C Owner's Manual

Installation of outdoor unit
 Remove the outdoor unit from the carton and move it to the installation position on the roof.
 Put the outdoor unit over the chassis reinforced support and properly adjust the position to make sure they mate and the
four bolt holes on the corners align.
The outdoor unit weighs 28Kg,
lift the outdoor unit at the same time
with another person .
Use the M8 bolts and check if
the holes are consistent with the
holes of
bracket. If not then use a long screw
driver inserted up through the two
holes to assist with alignment.
10
Note
the plenum mounting