Advertisement
Step 8
8-1 Lift the box up and off of the styrofoam packing.
8-2 Separate the styrofoam packing. Remove plastic
wrapping from the engine.
Lift box
Step 9
Tools:
• 5/16" Allen Wrench
9-1 Install one 1/2"x3/4" Allen Bolt.
9-2 Make sure Platform is flat and level and
completely tighten hardware from steps 5
through 9.
Hardware (1:1):
1 Button Head Cap Screw With Threadlock (1/2" X 1 ")
Assembly (Unboxing)
Styrofoam packing
1/2"x 1" Allen Bolt
Separate styrofoam
packing
1/2" Washer
1 Washer (1/2")
Advertisement
