Advertisement
Step 13 Tighten Tension Shaft Holder
Tools:
• 7/32" Allen Wrench
13-1 Use a 7/32" Allen Wrench to tighten the Tension Shaft Holder by
tightening the screws in numerical order shown on the tensioner.
Tighten the two screws marked 1, then the two marked 2, etc.
Note: Do not replace Top Cover at this time.
Tension screws
Tension Shaft Holder
Assembly
Tighten screws in order
1&1 , 2&2, 3&3, then
4&4.
Advertisement
