Advertisement
Warning: The Bowflex Revolution
two people to unbox the main unit.
We have designed the packaging to make unboxing the main unit as safe and easy as
possible.
NOTE: Some of the hardware needed for unboxing is located on the Box 3 Hardware Card
Step 1
1-1
Open the top flaps of Box 2
(Figure A) and split the
corners along the perforations
to expose the top layer of
styrofoam. (Figure B)
Step 2
2-1
Remove the Rear Stabilizer,
and Hardware Pack, (Figure C)
then remove the top layer of
styrofoam to expose the lower
portion of the Main Frame.
(Figure D)
The two Foot Caps that are
packaged in this box will be installed
in Step 6. (Figure E)
Foot Caps
Figure E
Assembly (Unboxing)
W A R N I N G
®
XP Home Gym is very heavy. Whenever possible use
Open top flaps
Figure A
Rear Stabilizer Hardware
Figure C
Top layer of
styrofoam
Split box corners
along perforations
Top layer of
Rear Stabilizer
Lower portion of
Main Frame
Figure B
styrofoam
Figure D
Advertisement
