Advertisement
Step 14 Install Pre-Tension SpiraFlex® Packs.
Tools:
• 3/32" Allen Wrench (Box 1)
Parts:
• Pre-tension SpiraFlex
14-1 Align the rounded edge of the Pre-tension
®
SpiraFlex
Pack with the rounded edge of
the Tension Shaft and slide it all the way
onto the shaft.
14-2 When the Pack makes contact with
the Cam, continue to apply pressure
and twist the Pack to the left until
you feel the Pack seat into place.
14-3 Install and completely tighten
hardware, installing screws in a star
pattern around pre-tension pack.
Hardware (1:1):
Hardware for this step located in Box 1
Step 15 Remove Cam Holders.
Tools:
• Phillips Head Screwdriver
15-1 Use a Phillips Head Screwdriver
to remove the Cam Holders.
Note: The Cam Holders are only
needed when the Spiraflex
packs are not installed and
may be discarded or recycled.
#8-32 X 3/8" Allen screw
®
Packs (Box 1)
Allen Bolt
®
Assembly
Pre-tension
SpiraFlex
Cam Holders
Side view of pre-tension
®
SpiraFlex pack
Hooks toward
®
Pack
main unit
Cam
12 Allen Bolt ( # 8-32 X 3/8")
Remove Cam Holders
Advertisement
