Honeywell Galaxy Manual page 44

The left hand pane will show the dates when the baselines have been copied from the panel, the date
displayed is the panel date.
The right hand pane shows the different data copied for the selected baseline. Data with a red circle with a
forward slash has not been copied from the panel. Clicking on the different icons will display the data copied
for that option.
The following data is recorded within the baseline: (Battery size, RF Battery State, PSU Voltage, RIO
Voltage, Zone Resistance, Panel Comm, Panel Memory, Panel Current, Batt. Charging Status).
Battery Size
Gives the standby and charge time for each battery on the system, ie. Those on the power supplies.
RF Battery State
Displays the RF zones that are in low battery.
PSU Voltage
Gives the status, voltage and current of the power supplies.
RIO Voltage
Gives the voltage for the RIO.
Zone Resistance
Gives the zone resistance for hardwired zones, signal strength and time since supervision for RF zones.
Panel Comm
Gives the percentage communication for RIO's, keypads and Max's.
Panel Memory
Gives the memory status after a memory test.
Panel Current
Gives the current for a RIO.
Batt Charging Status
Gives the voltage of the battery while charging.
Power Supplies Recording
Clicking on the Power Supplies icon (with the Rec button selected) will copy the power supplies data.
Deselecting the Rec button will display the data copied.
This option only shows the last data copied from the panel.
Zone Resistance Recording
Clicking on the Zone Resistance icon (with the Rec button selected) will copy the zone resistance data.
Deselecting the Rec button will display the data copied.
This option only shows the last data copied from the panel.
Note: The zones are enabled for copying by carrying out a Walk Test.
High Low Res. Recording
Clicking on the High Low Res. icon (with the Rec button selected) will copy the High Low resistance for the
last 14 days data. Deselecting the Rec button will display the data copied.
This option only shows the last data copied from the panel.
Zone Activity Recording
Clicking on the Zone Activity icon (with the Rec button selected) will copy the zone activity data. Deselecting
the Rec button will display the data copied.
This option only shows the last data copied from the panel.
Note: The data for this is established on the panel by selecting the required Activity Mon option for each
zone.
Page 40