General Characteristics And Conditions Of Use - Camozzi D Series Instruction Manual

3. General characteristics and conditions of use

PNEUMATIC
Valve type
Valve functions
Material
Connection
Temperature
Air Characteristics
Valve Size
Working pressure
Pilot pressure
Valve flow
Mounting position
IP protection
ELETTRIC
D-Sub Connector
Max Power consumption
Supply voltage
Max coils
Switching valve
Fault detection led
Operation status LED
Electropilot power
Instruction manual
Series D multipole size 1
Spool with seals
5/2 monostable e bistable
2x3/2 NC 2x3/2 NO
5/3 CC – CP – CO
spool: AL - spool seals: HNBR - other seals: NBR - metal body -
technopolymer bottoms and sub-base
outlet 2 e 4
thread or bushings, tube size variable according to pitch
0 ÷ 50 °C
filtered and non-lubricated compressed air in class 6.4.4
according to ISO 8573-1: 2010. If lubrication is required, use
only oils with max. Viscosity. 32 Cst and the version with
external servo pilot. The air quality to the servo pilot must be in
class 7.4.4 according to ISO 8573-1: 2010 (do not lubricate).
10 mm
-0.9 ÷ 10 bar
2 ÷ 7 bar
3.5 ÷ 7 bar (con pressione di lavoro superiore ai 6 bar per la
versione 2x3/2)
250 Nl/min (10.5 mm)
everyone
IP65
25 o 44 poles
1,5 A
24 V DC +/-10%
22 coils on 11 valve positions (with 25-pin Sub-D connector)
38 coils on 19 valve positions (with 44-pin Sub-D connector)
Yellow led
Red led
Green led - WLAN operation, power supply present
1W (Power reduction to 0,3W after 100 ms)
7
5000026173
1x3/2 NC+1x3/2 NO
Version 00