7.4.3 Set Digital Output: allows remote operation of the single coil of the valve island.
Warning: make sure that the solenoid valves are activated in total safety
In this mode the controls and commands of the PLC or control system are deactivated
Click on the "On" and "Off" keys to pilot the single solenoid pilot and to switch the solenoid coils.
7.5 General information and status of the individual solenoid coils
13
14
Click on the drop-down menu (13) to open the list of valves mounted on the Series D island and click on the
valves (14) to display the content screen: general information (15), the health status of the individual
solenoid pilot (16) , the Tabs for displaying (17):
Variables: the variables (for example the number of operations) recorded for the valve
mounted on the sub-base are displayed
Alarms: the status of the alarms monitored for the single sub-base / valve is displayed (see
chapter "8. Fault identification"> "Sub-base LED behavior" table)
Instruction manual
Series D multipole size 1
15
17
21
5000026173
Version 00
16