Table of Contents
Advertisement
COMPORTAMENTO LED MASTER:
STATO
(red)
●
Work
(WLAN OFF)
●
(green)
●
(red)
Work
(WLAN ON)
●
(green)
Valve alarm
●
(red)
Comunication
●
(red)
Alarm
Under
Voltage
●
(red)
alarm
(red)
●
Numbering
Alarm
(green)
●
(red)
●
Mapping
Alarm
(green)
●
Instruction manual
Series D multipole size 1
LED
COMPORTAMENTO
Blinking
(1 blink @10 Hz every 1s)
Blinking
(1 blink @10 Hz every 2 s)
Blinking
(1 blink @10 Hz every 1 s)
Blinking
(2 blink @10 Hz every 1 s)
Blinking
(3 blink @10 Hz every 1 s)
Blinking
(1 blink @10Hz every 1s)
Blinking
(2 blink @10 Hz every 1 s)
Off
The valves island is in work status
and the WLAN module (optional) is
connection is NOT present or NOT
connected
Off
The valves island is in work status
and the WLAN module (optional) is
present and connected
At least a valve has an alarm:
-
-
-
-
- Solenoid Interrupted
The left terminal (Master) has lost
communication with the sub-bases
The power supply is under the
voltage threshold.
The island is in error of numbering,
it
has
communication with any sub-base
Carry out the numbering procedure
Off
as per point 6.6
The island is in a mapping error.
The layout of the sub-bases has
been changed, check it and if
necessary repeat the numbering
Off
procedure as per point 6.6
25
5000026173
Version 00
SIGNIFICATO
Subbase Overheating
Solenoid Overcurrent
Solenoid Overheating
Solenoid Not Energized
never
been
put
in
Advertisement
Table of Contents
