Tools You Will Need - Haier QVM7167 Installation Instructions Manual

TOOLS YOU WILL NEED

#1 and
#2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
4
Installation Instructions
Pencil
Scissors (to cut
template, if necessary)
Saw (saber, hole or keyhole)
Level
Ruler or tape measure and
straight edge
Electric drill with
3 16 7 16
1 2 5 8
Stud finder
Hammer (optional)
Carpenter square
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Duct and masking
tape
31-7000069 Rev. 1