Haier QVM7167 Installation Instructions Manual page 25

C5
MOUNT THE MICROWAVE OVEN
CAUTION
To avoid the risk of personal injury
(back injury or other injuries due to excessive
weight of the microwave) or property damage, you
will need two people to install this microwave.
WARNING
Risk of Electric Shock. Can cause
injury or death: If installing unit with metal cabinet,
cover the edge of the power supply cord hole in the
cabinet with the power supply cord bushing.
IMPORTANT: If filler blocks are not used, case
damage may occur from overtightening screws.
NOTE: When mounting the microwave, thread power
cord through hole in bottom of top cabinet. Keep it
tight throughout Steps 1–3. Do not pinch cord or lift
microwave oven by pulling cord.
1
Lift microwave, tilt it forward, and hook slots
at back bottom edge onto four lower tabs of
mounting plate.
Power Cord
2
Rotate front of microwave oven up against cabinet
bottom.
31-7000069 Rev. 1
Installation Instructions
C5
MOUNT THE MICROWAVE OVEN
(cont.)
Insert a self-aligning screw through top-center
3
cabinet hole. Temporarily secure the microwave
oven by turning the screw at least two full
turns after the threads have engaged. (It will be
completely tightened later.) Insert 2 self-aligning
screws (
1 4 2 1 4
holes. Turn two full turns on each screw.
Cabinet Front
Cabinet Bottom Shelf
Self-Aligning Screw
Microwave Oven Top
4 Tighten the three screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
5 Install grease filters. See the Owner's Manual
packed with the microwave oven.
) through outer top cabinet
Filler Block
This distance
can NOT
Equivalent
exceed 2"
to Depth
to ensure
of Cabinet
proper
Recess
installation
25