Page 3
Continue to hold release bar and pull strap down until it loosens. Just adding If you already have a Floyd bed and are just adding the headboard: A Loosen the strap headboard? on the bed frame (just a few inches).
Page 4
Insert Insert the headboard brackets between panels. Brackets should be 2" from the ends of the panels. brackets If you are setting up a king Floyd bed headboard, attach the headboard brackets between the two outermost panels.
Page 5
Tighten Hand-tighten the two fasteners on the bottom of each headboard bracket. fasteners...
Page 6
Insert the Set headboard panel in brackets, making sure the ends of the panel align headboard with the bed platform. Then tighten fasteners on & tighten both brackets to secure headboard panel in place.
Page 7
To tighten strap, crank ratchet back and forth until strap is taut. Re-tighten Don't forget to tighten the strap at the head of your bed to hold everything in place. the strap Then you're all done! Don’t be shy—we’d love to see your bed’s new home! @floyddetroit #thefloydbed...
Page 8
Have a question, comment, or suggestion? Only assemble as shown in these instructions. Just want to say hi? The Floyd Headboard should only be used with the Floyd Platform Bed Frame. Use extra precaution when assembling and have someone assist you. hello@floydhome.com Do not change the specifications or modify this product.
Need help?
Do you have a question about the Headboard and is the answer not in the manual?
Questions and answers