Advertisement
Quick Links
Advertisement
Related Manuals for Floyd The Sit-to-Stand Desk
Summary of Contents for Floyd The Sit-to-Stand Desk
- Page 1 How to Assemble: The Sit-to-Stand Desk...
- Page 2 Components: 1x Base Unit 2x Screws The Sit-to-Stand Desk 8x Covers 8x Small Threaded Bolts 1x Desk Top (47”, 59” or 70”) 2x Large Threaded Bolts 1x #6 Hex Tool 4x Zip Ties 1x #3 Hex Tool NOTE: You’ll also need: a #2 Phillips Head Screwdriver and a Level.
- Page 3 Step: 1 Remove cover, filler box, and hardware box. Inspect hardware to ensure parts are not discarded. Pro Tip: If you’re considering a return, save your packaging! Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 4 Step: 2 To protect base and floor, leave the base in the cardboard tray. Remove wrap and fold legs out. Then, tighten the 4 screws on either side of each leg. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 5 Step: 3 Lift legs ouf of tray and place on desktop, then loosen the two outer screws. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 6 Step: 4 Locate the two side rails and insert them into the side of the base as shown, then re-tighten outer screws. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 7 Step: 5 Next, locate the feet and attach them via the pre-inserted screws. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 8 Then, align the base with the corresponding holes in the under side of the top and attach with 2 bolts (D) on the center rail, and 4 bolts (C) on both side rails. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 9 Step: 7 Tighten the two locking pins on either side of the rail. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 10 #2 Philips head screw driver. Use zip ties to secure cables underneath desk surface. Control panel can be re- positioned to reverse side of desk top. See section 3 of user manual. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 11 Step: 9 With help, flip The Desk upright and use the feet at the front and back of each rail to ensure that your desk is level. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
- Page 12 Step: 10 Plug in your new desk Maximum load: and enjoy! 120 kg / 264.5 lb For any troubleshooting needs, please refer to the User Guide. Assembly Instructions: The Desk System The Sit-to-Stand Desk...
-
Page 13: Troubleshooting
The desk can only drive in one Perform a reset. direction (up or down). The desk is not horizontal. Perform a reset. During reset, only one column Perform a reset. is moving downward. Assembly Instructions: The Desk System The Sit-to-Stand Desk... - Page 14 We suggest lbs). Do not stand on the Sit-to-Stand Desk. Standing or leaning on the Desk using watertight pots or plastic drainage trays and frequently cleaning the area may cause risk and personal injury.
Need help?
Do you have a question about the The Sit-to-Stand Desk and is the answer not in the manual?
Questions and answers