Download Print this page

Floyd The Bedside Table Quick Start Manual

Download this manual

The Bedside Table Repair Kit

Need help?

Do you have a question about the The Bedside Table and is the answer not in the manual?

Page 1 The Bedside Table Repair Kit...
Page 2 Components 6x Black Screws (For Black Tables) 6x Silver Screws (For White Tables) You’ll also need: 1x Shipping Box 1x Phillips Head Screwdriver (Not included) *Don’t discard! Repair Kit: The Bedside Table...
Page 3 Table upside down on a soft, clean surface like a rug. Then, insert the Shipping Box into the open space—this will act as a temporary support for your shelf. Lastly, slide the shelf into place. Repair Kit: The Bedside Table...
Page 4 From there, you can install them in any order. Be sure to push the wood shelf up against the metal frame as tightly as possible when installing screws. NOTE: The replacement screws are intentionally tight! Repair Kit: The Bedside Table...
Page 5 Your repair is complete! Check to ensure all screws are tight, but do not over-tighten. Once all the screws are in place, slide the shipping box out and install the Bedside Table per the original instructions. Repair Kit: The Bedside Table...