Download Print this page

Floyd Chaise Instructions Manual

Download this manual

Chaise

Need help?

Do you have a question about the Chaise and is the answer not in the manual?

Page 1 Chaise...
Page 2 Components 4 × Chaise Legs 12 × Knobs 2 × Connector Plates 1 × Chaise Panel 1 × Chaise Cushion...
Page 3 Assemble Begin by attaching the four legs to the bottom of the chaise panel with the knobs (We recommend the chaise doing this on a rug or the packaging it came in to protect the surface of the panel). When all four legs are attached,...
Page 4 Attach Place the chaise panel on the side of the sofa where you want to attach it (it can go on either the chaise the left or right side, and you can always switch it later!) Take the two chaise connector...
Page 5 All done! On the side where the chaise is attached, replace the seat cushion with the long chaise cushion. Note: The chaise cushion should be placed so that the zipper pull is at the front of the sofa. That’s it – you’re done!
Page 6 The legs, panels, cushions, and hardware components are only intended as shown for use with the Floyd Sofa. The sofa is only meant for use indoors. The sofa has a tested capacity of 300lbs per seat. Loading it with more than this can cause personal risk and injury.
Page 7 FLOYDHOME.COM...

Sofa