Appendix B Standard And Optional Accessories For Specific Measuring Functions - Benning IT 115 Operating Manual

Appendix B Standard
measuring functions
BENNING IT 115
The table below lists recommended standard and optional accessories required for specific
measurements. Please refer to chapter 3.5 for further information on standard and optional
accessories.
Measuring function
Insulating resistance
Low-impedance resistance
Continuity test
Line impedance
(voltage drop)
Loop impedance
RCD testing
Earthing resistance
Phase sequence
(rotary field)
Voltage, frequency
and optional
Appendix B – Standard and optional accessories
Appropriate accessories (accessories with item no. are optional)
universal three-wire test cable
"Commander" test probe (switchable by means of
"TEST" key) (044155)
universal three-wire test cable
"Commander" test probe (switchable by means of
"TEST" key) (044155)
40 m measuring line BENNING TA 5 (044039)
universal three-wire test cable
test cable with shock-proof plug
"Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
"Commander" test probe (switchable by means of
"TEST" key) (044155)
universal three-wire test cable
test cable with shock-proof plug
"Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
universal three-wire test cable
earthing kit consisting of two earth rods, three test
cables (044113)
universal three-wire test cable
16 A CEE measuring adapter, 5-pin, for voltage / rotary
field measurement (044148)
universal three-wire test cable
"Commander" test probe (switchable by means of
"TEST" key) (044155)
test cable with shock-proof plug
"Commander" test plug for shock-proof socket
(switchable by means of "TEST" key) (044149)
- 64 -




















accessories for specific