Error Messages - Sony UP-D898DC Instructions For Use Manual

Symptom Causes/remedies
Printing is interrupted. Does the sunlight or incandescent light
When printing, the that includes strong infrared light
unit discharges several irradiate the paper exit?
tThe unit has an infrared light sensor
centimeters of the
white paper and stops. that detects the printing paper.
The print operation Therefore, when the light directly
cannot be performed. irradiates the paper exit, paper
The FEED operation detection may not operate correctly.
cannot be performed. Do not expose the paper exit to
When the paper is set light directly.
correctly, "EMPTY" is
displayed.

Error Messages

Messages appear on the LCD under the following
conditions. Take the remedial actions shown next to the
messages to correct the problem.
Messages Description and remedy
DOOR The door panel is open.
tClose the door panel until it is
EMPTY • There is no paper loaded.
• Paper has been used up.
COOLING The protection circuit that prevents the
thermal head from overheating has
been activated.
tWait for the message to disappear.
LOCK The menu operation function is locked.
The menu lever, CONTRAST control
and BRIGHT control are disabled.
tIf you want to perform menu
ERROR The unit has encountered a technical
problem.
tRestart the unit.
30
locked securely.
tLoad some paper. (page 13)
Printing will then resume
automatically.
operations or use those controls,
contact the nearest authorized
dealer.
If the display does not disappear,
contact the nearest authorized
dealer.