Sony UP-D898DC Instructions For Use Manual page 4

Important EMC notices for use in medical environments
• The UP-D898DC needs special precautions regarding EMC and needs to be installed and put into service according to
the EMC information provided in the instructions for use.
• Portable and mobile RF communications equipment, such as cellular phones, can affect the UP-D898DC.
WARNING
The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony
Corporation, may result in increased emissions or decreased immunity of the UP-D898DC.
Guidance and manufacturer's declaration – electromagnetic emissions
The UP-D898DC is intended for use in the electromagnetic environment specified below. The customer or
the user of the UP-D898DC should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
WARNING
If the UP-D898DC will be used adjacent to or stacked with other equipment, normal operation of the UP-D898DC under
such configurations should be verified via observation.
Compliance
Group 1
Class B
Not applicable
Not applicable
Electromagnetic environment – guidance
The UP-D898DC uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
The UP-D898DC is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
4