Error Messages - Sony UP-X898MD Instructions For Use Manual

Error Messages

Messages appear on the LCD under the following
conditions. Take the remedial actions shown next to the
messages to correct the problem.
Messages Description and remedy
DOOR The door panel is open.
tClose the door panel until it is
EMPTY • There is no paper loaded.
• Paper has been used up.
COOLING The protection circuit that prevents the
thermal head from overheating has
been activated.
tWait for the message to disappear.
LOCK When only the BRIGHT (brightness)
control and CONTRAST control are
locked;
tKeep pressing the menu lever for
When the menu lever, BRIGHT
(brightness) control, and CONTRAST
control are locked;
tIf you want to perform menu
ERROR This unit has encountered a technical
problem.
tRestart the unit.
NO.INPUT The PRINT button is pressed when the
video signal is not input.
tConnect the VIDEO input
38
Error Messages
locked securely.
tLoad some paper. (page 15)
Printing will then resume
automatically.
about three seconds and release the
lock, and operate the unit.
operations or use those controls,
contact the nearest authorized
dealer.
If the display does not disappear,
contact the nearest authorized
dealer.
connector to the video equipment
through the BNC cable, and then
press the PRINT button after the
video signal is input.
Messages Description and remedy
STOR.ERR The USB flash drive connected to the
USB connector failed to save the
image.
• The USB flash drive is not Sony
product with less than 64 GB.
tUse a Sony USB flash drive with
less than 64 GB.
• The USB flash drive is not
formatted with FAT16 or FAT32.
tUse a USB flash drive formatted
with FAT16 or FAT32.
• The write-protect function of the
USB flash drive is set.
tClear the setting.
• The USB flash drive has more than
one partition, and so the unit
recognizes it as multiple drives.
tUse a USB flash drive having only
one partition.
• The USB flash drive has security
functions such as fingerprint
authentication.
tThe unit does not recognize all
features of every USB flash drive.
• The USB flash drive malfunctions.
tUse a new USB flash drive.
NO.SPACE The USB flash drive does not have
enough space.
tChange the USB flash drive with
one that has free space.