Paper; Paper You Can Use - Sony UP-D898DC Instructions For Use Manual

Notes
• When this unit is turned on, do not make the computer
which is connected to this unit standby (suspended) or
pause mode. It may cause a malfunction.
• If a UP-X898MD/D898MD printer driver is already
installed, first uninstall the driver and then install the
UP-898 series printer driver contained on the supplied
CD-ROM.

Paper

Use only Sony UPP-110S/110HD/110HG paper
designed for use with this unit. High print quality cannot
be guaranteed if any other paper is used with this unit,
and such paper could damage the unit.
You cannot use the UPP-110HA as specified for the
UP-D890 series printer.

Paper You Can Use

Print paper characteristics are as follows.
Print Characteristics
TYPE I (Normal)
TYPE II (High Density)
TYPE V (High Glossy)
Notes on storing and handling paper
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Storing unused paper
• Store unused paper at a temperature below 30 °C
(86 °F) in a dry location that is not exposed to direct
sunlight.
• Do not store unused paper near volatile liquids or
allow the paper to contact any organic volatile liquid,
cellophane tape, or any compound of vinyl chloride.
Loading paper
• Handle the paper carefully when loading not to touch
the printing surface with your fingers.
Inspection gel, fingerprints or perspiration could cause
pictures to blur.
• After removing the label from the leading edge of the
paper, pull the paper out 15 cm to 20 cm (6 inches to
8 inches) before printing. Label adhesive remaining on
the paper could spoil a picture.
• If you reuse paper that has been removed once, pull
out 15 cm to 20 cm (6 inches to 8 inches) before
printing. If the dust, etc. exists, it could spoil a picture.
12
Paper Type
UPP-110S
UPP-110HD
UPP-110HG