Basic Menu Operations - Sony UP-D898DC Instructions For Use Manual

Basic Menu Operations

This section describes the basic menu operations which
are common to each menu, taking settings for printing
direction as an example.
1
Press the 1 On/standby switch to on.
The back light on the 1 On/standby switch and
LCD lights in green.
LCD
2
Confirm that "READY" is displayed on the LCD,
and push the menu lever.
The unit enters the menu mode.
Menu item is displayed on the LCD.
3
Display "PREF." by shifting the menu lever up or
down.
4
Push the menu lever or shift it to the right.
The unit enters the menu mode in which you can set
printing condition. The menus have "-" in front of
their name.
5
Display "-BACWRD" by shifting the menu lever
up or down.
6
Push the menu lever or shift it to the right.
The unit enters the mode in which you can select
the printing direction.
"BACW:OFF," which is the default setting, is
displayed on the LCD. "BACW:OFF" is the
currently selected setting.
In this menu operation, you will change the setting
to "BACW:ON."
7
Display "BACW:ON" by shifting the menu lever
up, and then push the menu lever.
"BACW:ON" is registered as the printing direction.
"-BACWRD" is displayed on the LCD.
Note
If about 20 seconds elapse without making any
menu operation after you have displayed the menu
item or setting, the display returns to "READY" on
the LCD and the unit exits the menu mode. In such
a case, the setting of "-BACWRD" is not changed.
20