Table of Contents
Advertisement
1 – 1
Foreword
Regulations in force in the country of use take precedence over the guidelines for operation
and safety listed herein. It is the responsibility of the person in charge of the equipment to check
the accordance between the guidelines and the regulations.
The person in charge of safety on customer's side will supplement these instructions with any
guideline he will consider applicable.
Compliance with the Safety Instructions below is necessary to ensure persons and goods'
safety during equipment operations. Three pictogcylinders are used to call users' attention.
This symbol signals potentially hazardous conditions that might result in serious or
fatal accidents if safety instructions are ignored.
This symbol points out to situations or events that might result in injury if safety
instructions are ignored.
This symbol reminds users of safety rules or of hazardous situations that might
occur when such rules are broken.
All persons involved in the operation, maintenance, storage or ownership of this equipment
are required to read and comply with these Operation & Maintenance Instructions.
A user involved in an accident while infringing on these instructions risks being held liable with
regard to the consequences of the accident
This Operation and Safety Instructions Manual is intended for users and persons in charge of
the equipment and its maintenance. It might refer to various options of the machine and
illustrations included in this handbook may differ from actual details and accessories of your
equipment. Basic equipment features may be similar, but the GEISMAR Group reserves the right
to make improvements to the equipment.
For additional information on your equipment or this handbook, please contact the GEISMAR
Group.
When ordering spare parts, or requesting information or service, please provide equipment
reference details, including equipment type, code and serial number.
This information can be found on the nameplate. The nameplate shall be kept in good
condition.
1 – 2
Warning
Proper training, skills and tools are mandatory to use, maintain and repair correctly this work
equipment. Before any use of the work equipment including its maintenance, it is obligatory to be
familiar with its manual of instructions of use and maintenance, with its appendices and with
safety regulations in force on the work site.
Strict compliance with the general instructions given by the person in charge of safety on the
work site, especially if works are carried out without interruption of the traffic, is mandatory.
Technical documentation and the instructions will usefully come to supplement the knowledge
acquired during training courses. Yet they can in no case replace a formal theory and practice
training, given in a workmanlike manner.
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
Page 9
Chapter 1 – Safety
Advertisement
Chapters
Table of Contents
