General Safety Instructions - GEISMAR BRV Operation & Maintenance Instructions Manual

If the owner does not feel able to ensure correctly the aforementioned training of his
personnel, the GEISMAR Group is at its disposal for any assistance about the content of this
training.
The training must cover the explanation with the various functions of the material, the
instructions of use, maintenance and the safety regulations to be observed, as well as some
practical exercises.
1 – 3

General safety instructions

The equipment shall be used under normal operating conditions and it shall be adequately
maintained.
We recommend a familiarisation phase with equipment prior to its operational use.
Before starting using this equipment, make sure this can be done in optimal safety conditions.
If you have questions about equipment operation or work tasks, get additional information
from qualified personnel.
Never use the equipment for ends other than those it is intended for.
To prevent accidents or injuries, It is compulsory to wear individual protection clothing and
equipment in accordance with safety regulations of the work site (refer to chapter "Markings")
Keep away from moving parts until the equipment has stopped or reached a safe state.
All moving parts of this equipment entail risks of crushing or shearing
Equipment shall be cleaned on a regular basis, liquid or grease in excess shall be removed.
All safety signs shall be kept clean and readable at all times; missing or illegible sign plates shall
immediately be replaced.
S O
TARTUP AND PERATION
Maintenance work must be performed by qualified personnel in control of the safety
requirements applying to the operations to carry out.
Establish a progcylinder of inspection and record all maintenance operations.
Replace any damaged or worn element.
Never alter the equipment without study and authorization by the manufacturer.
D
URING PHASES OF
Get to know the work area and its features, restrict admission to personnel directly involved in
operation only
Observe the general and particular conditions of safety applicable to the work area and keep
a constant safety awareness during all phases of operation.
Get to know rescue plans in the event of incident or accident and safety instructions to follow
during all operation phases.
Never disable safety or limiting devices
Check that nobody stands within operating range of the machine.
Do not park the machine on a track section with slope.
The track clearance profile must be large enough for the equipment
The lanes must be in a condition allowing progression of the equipment without risks.
The use of this machine is permitted only when visibility conditions allow for easy sight of the
work and operation area
In the absence of contrary notice, this machine is not protected against lightning; it should not
be operated under adverse weather conditions.
/M /R
AINTENANCE
O
PERATION
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
.
EPAIRS
Page 10