Table of Contents
Advertisement
5 – 3
Handling and transport
The BRV can be brought to a jobsite by rail or road. The BRV is unloaded and placed on an
empty track using lifting equipment with a lifting capacity greater than 2700 kg. A central lifting
bail [a] has been installed on the chassis for this purpose. It is also fitted with 4 tie-down rings
[b].
There must be no-one in front of and/or behind the machine while it is being handled. Maintain a
distance of 3 metres on each side of the machine.
- Never lean on the BRV.
- Never push a load with the BRV.
- Avoid balancing the BRV.
During handling and transport, the coupling bar [5] must be stored on the supports [c] located
on the BRV.
5
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
a
Page 24
b
c
Advertisement
Chapters
Table of Contents
