6 – 7
Procedure for removing the conveyor
We recommend three people for this procedure. One person at each end of the conveyor and
one to release it.
To do this, proceed as follows:
– Unscrew the M16 nuts (framed in red)
6 – 8
Wear on the inner rubber protection
Carry out a visual check as this governs the acoustic comfort of the BRV. If faulty, please
contact out after-sales service to carry out a repair.
UNDERSIDE VIEW OF THE BRV
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
Page 35