Placing On Track Under Live Overhead Wire - GEISMAR BRV Operation & Maintenance Instructions Manual


- Never lean on the BRV.
- Never push a load with the BRV.
- Avoid balancing the BRV.

When going over level crossings and other track equipment, the rail-road digger will need to lift the
BRV to avoid damaging the rubber tubes.
5 – 3 – 3

Placing on track under live overhead wire

The BRV can be placed on or taken off the track with a rail-road loader by lifting the machine
200 mm above the track while complying with the clearance height under overhead wires of 4280
mm (NF F 58-003). For all other rail-road diggers, uncouple the towbar while placing on or taking
off the track.
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
Page 26