Rail Brush; Coupling Bar - GEISMAR BRV Operation & Maintenance Instructions Manual

4 – 1 – 4

Rail brush

Two rail brushes remove ballast from the rail base or rail fasteners. There are a number of
configurations for the position of these brushes (see 5.3.1 and 5.3.2).
4 – 1 – 5

Coupling bar

The coupling bar connects the rail-road digger and the BRV. As supplied, it is designed for a
"Rockinger dia. 40 mm" type coupling on the digger, with a height of between 1.1 and 1.3 metres
above the rail. It is 2.2 metres in length.
Société des Anciens Établissements L.GEISMAR – Prohibited Reproduction ©
Page 21