Table of Contents
Advertisement
8 Service and Maintenance
Operation of the unit presents the hazard of thermal contact. It is therefore
recommended to allow the unit time to cool before performing any maintenance.
The complexity of servicing the unit presents the hazard of human error. It is
therefore recommended only technicians perform maintenance.
Operation of the unit presents the hazard of material inhalation. The unit can
produce brake and metal dusts. It is therefore recommended to wear a proper PPE
mask and clean any dust debris from the unit and motor prior to maintenance.
Maintenance of the unit presents the hazards of slipping. Lubricants can
spill/spread during maintenance of the unit, it is therefore recommended to keep the
workspace clean at all times during maintenance to avoid slipping.
If it is necessary to remove safety installations, these must be installed again and checked for proper
function immediately on completion of the work.
Observe the setting, maintenance and inspection operations prescribed in the operating manual,
including information on the replacement of parts/parts of the equipment! Observe the specified
intervals! This work may only be carried out by specially trained and authorised specialist personnel.
In order that safety can be assured during work on the machine or on the technical installation, all types
of power supply (electric, pneumatic) must be switched off and secured to prevent switching on with the
machine at standstill! Pressurised systems must be relieved!
During installation work above head height, use the provided or other safe access ladders and working
platforms. Do not use machine parts as climbing aids! When working at great heights, take measures to
prevent falling, e.g. in the form of railing or safety harnesses!
Always securely retighten all screw fittings loosened during service and maintenance work!
Carry out starting and stopping operations for all work as described in the operating manual!
Regular inspection and maintenance of the machine is of great importance. It reduces the occurrence of
malfunctions and increases the operational safety.
37
Advertisement
Table of Contents
