Table of Contents
Advertisement
Installation Prerequisites
Permits/Legal Documentation
Be sure to comply with all local standards, ordinances and legal requirements
Building/Installation Site Integrity: Be sure the conditions comply with requirements of
parent and unit documentation requirements. Unit will be mounted to an anchored
base pate.
Base plate is anchored with floor bolts of the same size or larger than the mounting
bolts for the unit. The table below shows the unit bolt and dowel requirements.
MDE600M
MDE700M
MDE900M
Base plate is compliant within required 0.1 mm of flatness.
Careful leveling is critical. Mounting to an uneven surface will cause housing
distortion
Unit Position: Ensure the unit is properly accessible in its position of incorporation
Cam-Box cover easily accessible
Motor easily accessible
Seal Integrity: Ensure integrity of input and output assembly seals
Lifting the unit introduces the hazard of falling/crushing. Ensure lifting area is clear of
all but authorized personnel.
Lifting the unit introduces a hazard of free-movement. Move the unit at a slow,
deliberate pace. Take care working with a hoist that does not have a brake as it will
not lock in place.
Improperly sized equipment introduces the hazard of failure. Make sure all equipment
is properly sized and selected.
A new, foreign object introduces the hazard of tripping/entanglement to the general,
everyday workflow of the area. Make sure installation and transportation area is well
marked and restricted.
Cumbersome objects introduce the hazard of awkward positions. Ensure all staff are
properly trained on lifting and position techniques.
Unguarded unit introduces the hazard of sharp edges. Ensure sharp edges are clearly
marked and visible to personnel.
Ensure transportation route/area is completely clear to avoid collision of package/unit
with external objects.
Unit
Mounting
Unit
Screw
M16
M16
M20
Base Plate
Qt
Thickness (mm)
4
32
6
32
8
40
27
Dowel
Qt
12 H7
2
12 H7
2
12 H7
2
Advertisement
Table of Contents
