Table of Contents
Advertisement
Gas, dust, steam, fumes
a)
Carry out welding, flame cutting and grinding work on the machine only when
this is permitted. There is a risk of fire and explosion!
b)
Before starting welding, flame cutting and grinding work, clean the machine and
its environment of dust and inflammable substances and ensure adequate
ventilation (explosion hazard)!
c)
Inspect fume extraction and ventilation systems at regular intervals and check
for proper function!
d)
When working in confined spaces, observe any applicable national regulations!
(e.g. have a second person standing by for a fast rescue)
4.8 Safety and Monitoring Installations
No safety or monitoring equipment is included with this unit
All safety and monitoring installations, as well as their legal compliance with relevant
ordinances, fall under the responsibility of the end-user/owner
4.9 Warning Devices
No warning devices are included with this unit
All warning devices, as well as their legal compliance with relevant ordinances, fall under the
responsibility of the end-user/owner
4.10 Technical Data
The MDE unit is not shipped with oil and is the output bearing is greased.
Dimensions and weights:
Dimensions (LxWxH )[mm]
MODEL
L
W
MDE600
972
721
MDE700
1093
1025
MDE900
1363
1079
H
360
450
550
20
Hazard zones
Technical
data
Advertisement
Table of Contents
