Table of Contents
Advertisement
3 Product Safety
A basic precondition for the safe handling and trouble-free operation of this machine is thorough
knowledge of the fundamental safety precautions.
Organisational measures
Keep the operating manual available at the place of operation of the machine and in a legible condition at
all times!
a)
Supplement the operating manual to include provisions to cover specific company aspects (e.g.
supervisory and reporting obligations, work organisation, work processes, personnel employed,
and fire alarm and firefighting possibilities, operation of fire extinguishers).
b)
Supplement the operating manual to include binding local provisions on accident prevention and
environmental protection (e.g. handling of hazardous substances, disposal of operating and/or
ancillary media, provision/wearing of personal protective equipment)!
c)
Instruct all personnel to observe the operating manual!
d)
If the personnel discovers faults or hazards, the owner or his representative must be informed
immediately.
Technically safe condition
a)
Keep all safety and hazard signs on and around the machine complete and in a legible condition!
b)
Do not make any modifications, attachments or alternations to the machine that could impair safety
without consultation/agreement with the manufacturer/supplier. This applies also to the installation
and setting of safety devices and valves, and for welding on load-bearing parts.
c)
Do not make any program changes to the software of programmed control systems!
Major modifications to the machine and/or program changes may
invalidate the EC Declaration of Conformity!
d)
Observe intervals prescribed by law or in the operating manual for recurring tests/inspections and
the replacement intervals for safety-critical components!
e)
Spare parts must satisfy the technical requirements stipulated by the manufacturer. This is always
guaranteed with OEM spare parts.
f)
Be sure to have appropriate workshop equipment available for carrying out independent service
and maintenance work.In addition to this operating manual, the information and tips contained in
the suppliers' documentation (see Annex) must also be observed!
9
Advertisement
Table of Contents
