Recommissioning; Operation; Operating And Display Elements - DE-STA-CO MDE Series Installation Manual

Recommissioning

The following hazards may be present during this Life-Phase of the
unit.
Recommission introduces the hazard of unsafe operation. Make sure
only authorized personnel are present for recommissioning and unit-
hazard-areas are visually inspected.

Please also verify the following items:





Once all hazards have been addressed and visual inspection passed proceed
with normal commissioning procedures

7 Operation

7.1 Operating and Display Elements

The following hazards may be present during this Life-Phase of the
unit
HAZARDS

Interference: Serious to fatal injury can result from rotating parts striking
loading equipment (tooling) due to incorrect installation of loading
equipment or the unit itself

Properly size and adjust tooling and perform a soft run (turn unit by
hand as described in section 5.3.2.4.) prior to operation to check for
any places of interference

Change in Operation Parameters: Changes in operation parameters can
result in serious to fatal injury if not performed correctly
No damage to mounting surfaces/plates
No arbitrary equipment (used for repairs etc.) left unattended on the
dial plate or near the unit
All other complimentary machinery has been tested and is fully
operational
All safety equipment is operational and active
35
Set-up
and
tooling
Operating
and display
elements