Machine Description; Presentation And Identification - DE-STA-CO MDE Series Installation Manual

4 Machine Description

4.1 Presentation and Identification

General view of the machine
01
Figure 2 Access
02
03
01
02
 The unit consists of the
following main components
(FIGURE 1)
Housing: Machined Housing
01.
Weldment, Cover Plate
Output Assembly: Follower-
02.
Wheel, Dial Plate, Output bearing
Input Assembly: Cam, Cam-
03.
Shaft, Reducer Mounting plate,
Gear motor with brake.
Figure 1 Unit
Center-Bore: Allows passage
04.
of wires, robotics and various
tooling through unit.
Allows for Table-Top or
05.
Trunnion (optional) mounting with
mounting holes placed on front
and bottom faces of housing.
12
Presentation
and
identification