Table of Contents
Advertisement
PS200-LMP
PORTABLE GAS MONITOR
Figure 21: Switch OFF
The audible alarm sounds every second to alert user that the monitor is switching OFF.
3.10. Modes
The monitor has 3 modes of operation:
1. Inspection (INSPT)
2. Personal Surveyor (PS)
3. Purge
3.10.1. Building Identification Number (BIN)
At the end of the warm-up sequence, the monitor displays the INSPECT MODE ENTER BIN screen
(see
Figure 22: BIN
Screen).
NOTE: You cannot enter INSPT mode until you input a valid BIN.
Figure 22: BIN Screen
At this stage, before you input a BIN, you can switch between PS mode, PURGE mode, and the
BIN ENTER screen by pressing both buttons simultaneously.
16
64171LMP
Revision 3
Advertisement
Table of Contents
