Information Disposal Of Packaging; Symbols; Intended Use - Viessmann Vitodens 100-W B1HF Series Installation And Service Instructions Manual

Information
Disposal of packaging
Please dispose of packaging waste in line with statu-
tory regulations.

Symbols

Symbol Meaning
Reference to other document containing
further information
Step in a diagram:
1.
The numbers correspond to the order in
which the steps are carried out.
Warning of material losses and environ-
mental pollution
Live electrical area
Pay particular attention.
Component must audibly click into place.
■
or
Acoustic signal
■
Fit new component.
■
or
In conjunction with a tool: Clean the sur-
■
face.
Dispose of component correctly.
Dispose of component at a suitable collec-
tion point. Do not dispose of component in
domestic waste.

Intended use

The appliance is intended solely for installation and
operation in sealed unvented heating systems that
comply with EN 12828 (as well as CECS215-2017 and
CE: CS215-2017 in relation to CN), with due attention
paid to the associated installation, service and operat-
ing instructions. It is only designed for heating up heat-
ing water that is of potable water quality.
Intended use presupposes that a fixed installation in
conjunction with permissible, system-specific compo-
nents has been carried out.
8
The steps in connection with commissioning, inspec-
tion and maintenance are found in the "Commission-
ing, inspection and maintenance" section and identified
as follows:
Symbol Meaning
Steps required during commissioning
Not required during commissioning
Steps required during inspection
Not required during inspection
Steps required during maintenance
Not required during maintenance
Commercial or industrial usage for a purpose other
than heating the building or DHW shall be deemed
inappropriate.
Any usage beyond this must be approved by the man-
ufacturer in each individual case.