Commissioning The System - Viessmann Vitodens 100-W B1HF Series Installation And Service Instructions Manual

Commissioning, inspection, maintenance

Commissioning the system

!
Please note
Only commission the appliance with a fully filled
trap.
Check that the trap has been filled with water.
Commissioning via commissioning assistant
1. Open the gas shut-off valve.
2. If the appliance has not been switched on yet: Turn
on the ON/OFF switch. The commissioning assis-
tant starts automatically.
If the appliance has already been switched on, you
can call up the commissioning assistant yourself:
1. and OK – press simultaneously for
approx. 4 s.
2. Use / to select "b.5" and confirm with
"OK".
Note
AP and appear on the display. Confirm with
OK to start the connection with the software tool:
See chapter
"Commissioning via software tool".
3. – press for 4 s to start the commissioning
assistant.
32
3. For further steps, see commissioning assistant in
the following overview.
Commissioning via software tool
Note
Apps for commissioning and service are available for
iOS and Android devices.
1. Open the gas shut-off valve.
2. AP and appear on the display.
Press OK and enter the password for the heat gen-
erator to carry out commissioning with the software
tool.
3. Select ON and confirm with OK.
4. Follow the instructions in the software tool.