Tab: Megaco Control - AudioCodes Mediant 3000 TP-6310 Performance Monitoring And Alarm Manual

Performance Monitoring and Alarms
EMS Parameter Name RT / Hist Gauge /
Call Attempts Per Sec
Max
Call Attempts Per Sec
Min
2.4.4

Tab: MEGACO Control

Frame: Gateway System Monitoring (Configuration), Tab: MEGACO Control
EMS Parameter Name RT / Hist Gauge /
[H.248] Num of Active
Contexts Avg
[H.248] Num of Active
Contexts Min
[H.248] Num of Active
Contexts Max
[H.248] Service Change
Command -
Disconnected
[H.248] Service Change
Command - Restart
[H.248] Service Change
Command - Forced
Version 7.0
Counter
HIST Counter Maximum of call attempts (successful and
unsuccessful) per second, during last interval.
Mib name: acPMCPCallAttemptsPerSecMax
HIST Counter Minimum of call attempts (successful and
unsuccessful) per second, during last interval.
Mib name: acPMCPCallAttemptsPerSecMin
Counter
HIST Gauge Indicates the Average number of H.248 active contexts
incorporating at least 1 Termination, per TPM, during
the last interval.
Mib name: acPMActiveContextCountAverageMegaco
HIST Gauge Indicates the Minimum number of H.248 active contexts
incorporating at least 1 Termination, per TPM, during
the last interval.
Mib name: acPMActiveContextCountMinMegaco
HIST Gauge Indicates the Maximum number of H.248 active
contexts incorporating at least 1 Termination, per TPM,
during the last interval.
Mib name: acPMActiveContextCountMaxMegaco
HIST Counter Counts the Disconnected service change commands
sent (excluding retransmission) to the current MGC,
during last interval.
Mib name:
acPMMegacoServiceChangeCountValdisconnected
HIST Counter Counts the Restart service change commands
(excluding retransmission) sent to the current MGC,
during the last interval.
Mib name:
acPMMegacoServiceChangeCountValrestart
HIST Counter Counts the Forced service change commands sent
(excluding retransmission) to the current MGC, during
the last interval.
Mib name:
acPMMegacoServiceChangeCountValforced
2. Performance Monitoring Parameters
Parameter Description
Parameter Description
21 Performance Monitoring and Alarms