X-Rite Pantone Virtual Light Booth User Manual page 26

V i r t u a l L i g h t B o o t h
17. Tap the Take measurements button on the screen. The VLB will perform a LED SPOT
Measurement, D65 – Voltage Adjustment, and D65 Measurement.
NOTE: This process will take several minutes to complete.
18. After the measurements are completed, the VLB will perform a texture whitepoint adjustment.
19. After the adjustment is completed, a SUCCESS message will appear. Tap the Return to
Settings button on the screen.
20. Tap the Exit Setting button on the Setting screen to return to the Home screen.
21. Remove the calibration curtain from the front of the VLB.
22. Remove the i1Pro from the rotation stage and unplug it from the front panel.
23. Reattach the protective cover to the i1Pro and return it back to the front left drawer next to the
calibration holder.
24