X-Rite Pantone Virtual Light Booth User Manual page 22

V i r t u a l L i g h t B o o t h
2. Tap the Calibration button on the Settings screen to start the procedure.
3. Open the front left drawer on the VLB and connect one end of the USB cable into the i1Pro.
4. Plug the other end of the USB cable into the port on the front panel of the VLB.
5. After the i1Pro is connected, tap the Go to next step button on the screen.
6. If attached, remove the protective cover with ambient light measuring head from the i1Pro. The
arrow on the protective cover must point to the "O" unlock marking on the i1Pro before removing.
20