X-Rite Pantone Virtual Light Booth User Manual page 39

Daylight Filters Cleaning
Hold the diffuser and release the diffuser latch located at the front of the
1.
Slowly lower the front of the diffuser until it stops.
2.
Allow time for the daylight filters to cool before handling them.
Holding the filter pack (1), push the fastener button (2) in and lower the daylight filter pack.
3.
Repeat the procedure for the other filter pack.
(2)
Remove dust from both sides of the filter pack with a clean, dry, lint-free cloth.
4.
Remove dirt from the daylight lamp reflectors with a clean, lint-free cloth.
5.
Rotate the daylight filter pack (2) back into position and push the fastener button (1) in to secure.
6.
Repeat procedure for other daylight filter pack.
Rotate the diffuser to its closed position and secure it in place with the latch.
7.
(1)
V i r t u a l L i g h t B o o t h
unit.
(2)
37