List Of The Function Parameters - KERN EW-N Series Operating Instruction

7.2 List of the function parameters

The balance has been set to a certain standard configuration in the factory. This is
marked by a ☆ .
Function
Bar graph
Tolerance weighing
(excl. EW-120-4NM)
Zero alignment
Automatic shutoff after 3 min.
for rechargeable battery op-
eration (function is only
available inrechargeable
battery mode)
Display speed
Vibratory filter
Interface
(excl. EWB models)
46
Display Choice
1 b.G. 0 Off
☆1 On
☆0 Off
2 SEL
1 On (chap. 7.2.1)
3 A.0 0 No zero point correction
☆1 Automatic zero point correction activated.
4 A.P. 0 Automatic shutoff deactivated for re-
☆1 Automatic shutoff activated for rechargea-
5 rE. 0 Setting for metering
1 Sensitive and fast
2
☆3
4
5 Non-sensitive but slow
6 S.d. 1 Sensitive and fast (very tranquil installa-
☆2
3
4 Non-sensitive but slow (very unsettled
5 only EW-120-4NM
6 only EW-120-4NM
7 I.F. 0 Interface not active
☆1 6-digit data format (excl. EW-120-4NM)
2 7-digit data format (chap. 7.2.2)
Description of the choice
possibilities
chargeable battery operation (optional).
ble battery operation (optional).
↓
tion location).
↓
installation location).
EW/EG-N-e-1728